Hard water is always a problem for homeowners. Hard water can create a lot of problems and create unplanned expenses for the homeowners to fix these problems, and due to this, hard water needs to be treated. Before any corrective measures are taken, it is important to verify that hard water is in your home, rather than spend time, money and effort on the wrong issue.
Confirmatory tests are sometimes be expensive, therefore you should only employ it when it is absolutely necessary. There are certain signs that can let you know you have a hard water problem, and carry with them no added cost. Here are six signs that highlight the presence of hard water:
Water is essential for a lot of things in our lives and one of them is taking a bath. We take bath daily, sometimes two or three times a day, depending on our activities and when hard water is used, it causes the skin to dry up. Hard water is mainly due to an excessive composition of certain mineral elements and some of these elements are concentrated that some of them form physical particles. These element concentrations are very harmful to the skin and they react with the skin glands, absorbing moisture from the skin, and thus cause the skin to become dry. This reaction can sometimes cause itching and may even cause inflammation of the skin. Check how essential oil for dry skin can help.
The excessive concentration of elements present in hard water also cause some negative effect on clothes. Water is one of the major ingredients when doing our laundry and when hard water is used, this can create some problems. The chemical elements present in water are usually present in harmless quantities, but when hard water is used, the excessive concentration of chemical elements react with the fabric of the clothes and weaken them and it reacts with the coloring of the clothes as well. The effects of the fabric softening and discoloration are not instant, but is a gradual process and with each laundry session, continue to react until the effects become obvious.
Foam build up in bath tubs
One of the most common and most well-known effects of hard water is its inability to form lather with soap easily. In order for hard water to form lather, excess amounts of soap is required and when foam is eventually formed, it does not easily dissolve. The foam build up presents itself in bathtubs when we take our bath and it takes a while for it to dissolve or to flow into the drainage. Some of the foam makes its way into the drainage and can accumulate until it can cause a blockage, which can have other implication.
Defacing of bathroom equipment
We use our bathtubs and sinks for many activities and most of these activities involve the use of water. When hard water is available, it causes the bathroom surfaces to be discolored. As water flows through the equipment, little particles are deposited on the surface and continues to accumulate until equipment loses its color. The particles deposited are formed as a result of the high chemical elements present in hard water, the concentration of these elements are so high that they form physical particles, and these particles and stick to certain surfaces.
Shorter lifespan of water heaters
Water heater usually store water and heat them up so we can have water when we need it. As such, water can spend a while in the tank before it is used. During this period, particles present in water usually settle at the bottom of the tank and clings to the heating mechanism as well. When hard water is present, these particles involve the chemical elements of hard water. These elements react with the heating mechanism of the water heater and can cause it to stop working, or rust. It can thus ruin your water heater and thus reduce the expected lifespan of the water heater.
Spots on glassware
Similar to bathtubs, and with sticky surface as well, plates and other glassware can be ruined by hard water. Water is used to wash our plates and other glassware after usage and it sometimes takes a while to drain away. When hard water is used for this process, chemical particles are deposited on the surface of the plates and glassware. The effect is not immediately visible, but with each wash, more particles are deposited and this process continues until the particle accumulation becomes large enough to be visible. This results in spots on plates and glassware.
How a water softener helps
Water softeners have proven to be most effective way to handle all hard water related issues. A water softener helps to eliminate the hard nature of water, and provide a pure water into the home. Water softeners are systems that are installed at the source of the water, and all the water going to the house passes through the system, where there is a deposit of certain chemicals that are known to negate the effects of the chemicals found in hard water. These chemicals act on hard water and eliminate the elements that cause hardness, and goes through a filtering process, to eliminate all large particles present in the water. As a result of the water softeners effect, the water that flows into the home is clean, if you still want to know more, you can learn more the water softening process here. With the water softener, you no longer have to fear the presence of hard water, and you can enjoy all the benefits of using a water softener.
If you realize you have hard water in your home, and have installed a water softener, but you are still wondering how to eliminate of clear some of the effects of hard water from your home, there are natural products and chemical agents designed to help fight hard water problems.