Table of Contents
Basement sump pumps are essential to have for any home, particularly in areas of high flooding risk. In comparison, there are different styles of sump pumps that you can use in various basements and locations. Many homeowners wonder about the basement sump pump installation process. You have probably seen the professional installation adverts on TV and magazines or companies around you, such as pomwaterproofing.ca, but have vague notions about what will happen next. In actuality, the installation of a basement sump pump is quite simple. Of course, it is surprising that many people have either the wrong idea or incorrect information. Fortunately, the entire process is relatively easy. If you have proper knowledge about sump pump installation and the required tools, you can also do it yourself.
What is a sump pump?
A sump pump is simply a device that removes water from your basement without using force from a standing water collecting sump basin, usually located in the basement of residential homes. It can either be submersible or an above-ground model. This device removes the accumulated water using gravity pressure and pumping it out to a drainage point or down to a pre-arranged outdoor sump pit. These pumps are often installed between the floor joists in your basement, and the main house floor systems, and are designed to be manually operated or self-operated.
Why do you need it
You may not be aware that a basement waterproofing problem can be solved using a sump pump. Most homeowners would undoubtedly have a good reason for needing one, especially if they live in a location that is prone to floods. For instance, when the standing water in your basement suddenly begins to rise after a particularly wet winter, it can fill up your basement faster than you might expect. This sump pump will be able to save you from the worries regarding your basement flooded. To prevent this problem, you need to learn more about the installation process of the sump pump. Through this article, you are provided with additional details that you should keep in mind when making your decision about which sump pump to install in your home. By keeping these factors in mind, you will be able to ensure that your basement waterproofing project is completed successfully.
Install a sump pump – step by step
Choose the location
The first step to decide where to locate the basement sump pump. This is an obvious decision, and probably the one that most people make early on. It is best to put the pump as close to the main water supply as possible and to ensure that it is within easy access. There are different considerations for different areas, and it would be best to discuss them with a professional before any work has begun.
Prepare the required tools
When preparing to install a sump pump, you must have all the necessary tools, including a demolition hammer, shovel, drill, keyhole saw, hoe, pointed trowel, and a utility knife.
Set into the pit
Ensure that you have drilled the hole so that your new pump will fit securely into the pit. Cover the surrounding of the pit by applying enough gravel. Then finish the new floor patch by using a trowel to smooth the surface. When you’re done, let the concrete set for a day or two before the pump and pipe is installed.
Install electrical unit
The next step is to install the electrical unit. The most important aspect when it comes to the basement sump pump installation is to make sure that the power cord is hidden. Power cords are susceptible to damage because they can easily get twisted around, which could cause the wires to get shorted out. Aside from this, you also need to make sure that the power cord’s insulation is not damaged. Once the power cord is damaged, it can prevent the basement sump pump from functioning properly and can cause overheating and fire. This is why it is best to keep the power cord safe and protected whenever using the pump.
Check everything
Once you have completed the installation, it is time to check your new equipment’s functionality. It is important to have it checked regularly. This will help determine whether damage has been done to the pump or not. Sump pumps work on the principle of moving groundwater into the underground reservoir. If it is damaged or if it experiences leaks, water will enter the basement. This can result in the accumulation of water under the floors and carpets in the room.
Installing a sump pump or waterproofing system will also prevent your foundation pit from being flooded repeatedly. When choosing the right sump pump for your basement, it is also essential to consider your budget and the available space in your basement. Remember that installing a basement sump pump is not an easy task. It can be hard to do it yourself, especially if you are not familiar with the installation process. It is, therefore, safer to get the help of a professional to do the job. This will ensure that the job will be done properly and efficiently.
